Robbe power peak ultimate

kr1520.00

2 på lager

Varenummer: 12259 Kategorier: ,

Beskrivelse

Power Peak ULTIMATE Li, the ultimate intelligent charging station including battery management, for fast-charging NC, NiMH, lead-acid and now NEW: also Lithium batteries.

NC and NiMH batteries
Charges and discharges 1…25 NC or NiMH cells at charge currents of 0.1…5 Ampere and discharge currents of 0.5…3 Ampere.

Functions:
•Charge
•Discharge
•Discharge – Charge

Adjustment of:

•Charge current
•Discharge current
•No. of cells
•Battery capacity
•Automatic or manual charge
•Beeper On/Off

Display of:

•Discharged capacity
•Charged-in capacity
•Charge time
•Charge voltage
•Active charge / discharge cycle

After the start-up procedure a “working display” appears automatically, providing information at a glance about the current charge process:

Working display shows:

•Charge current
•Charge voltage
•Capacity
•Charge time

The digital Delta Peak charge termination circuit is optimised for the battery types NC and NiMH, and is switchable. Optional manual or automatic mode; in automatic mode the unit automatically calculates the charge and discharge currents and the final discharge voltage, then sets the optimum values.

Lead-acid batteries
Charges lead-acid batteries of 2 … 12 Volts nominal voltage at a maximum charge current of 5 Ampere.

Adjustment of:

•Charge current
•Battery voltage
•Battery capacity
•Beeper On / Off

Display of:

•Charged-in capacity
•Charge time
•Charge voltage

After the start-up procedure a “working display” appears automatically, providing information at a glance about the current charge process:

Working display shows:

•Charge current
•Charge voltage
•Capacity
•Charge time

Li-Io and Li-Poly-batteries
Charges Lithium batteries with 1…4 cells, both Li-Ion and Li-Polymer types, at charge currents of up to 5 Ampere.

Voltage settings:
3.6 / 3.7 – 7.2 / 7.4 – 10.8 / 11.,1 – 14.4 / 14.8 Volt

Adjustment of:

•Charge current
•Battery voltage
•Battery capacity
•Beeper On / Off

Display of:

•Charged-in capacity
•Charge time
•Charge voltage

After the start-up procedure a “working display” appears automatically, providing information at a glance about the current charge process:

Working display shows:

•Charge current
•Charge voltage
•Capacity
•Charge time

General information:
Ten variable charge program memories are available, in which settings for particular battery types can be stored.
The menu system exploits the large, backlit 2 x 16 character dot matrix LCD screen, optionally in German or English.
If the charger is connected to a mains PSU, this 12 Volt unit becomes a mains-powered one.
If the small, lightweight Power Peak SPS 7A mains PSU No. 8415 is used, a mobile 230 V / 12 Volt charge station is produced. In this case the maximum currents are limited with high cell counts.
 

Specification:
Dimensions: 155x125x55 mm
Charge current: 0.1…5 A
No. of NC cells: 1….25
 
  
 
 

Brand

Robbe

Tilleggsinformasjon

Vekt 900 g
Dimensjoner 24 × 18 × 8 cm

Omtaler

Det er ingen omtaler ennå.

Bli den første til å omtale “Robbe power peak ultimate”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *

2 + 4 =