Robbe DG 600 2.7 – 3.2m GFK


1 på lager

Varenummer: 12281 Kategorier: ,



The full-size
This machine is extremely popular amongst glider pilots, and was produced in several versions. The wingspan of the 17 m version of the DG 600 can be increased, and winglets can be fitted. The DG 600 with winglets is also flown in the 18-metre contest class.

The model
Our model can also be increased in span from 2.7 to 3.2 m by fitting the winglets included in the set. The DG 600 with the larger wings and the S3021 airfoil is designed primarily for circling in thermals. In this configuration the model offers very good handling and excellent thermalling characteristics. With the shorter plug-in tip panels and a wingspan of 2.7 m the glider can also be flown in strong winds, and is suitable for aerobatics.

The model is supplied with the final finish already applied. The wings are produced in a mould, and are supplied with the ailerons cut out. Both pairs of winglets are included in the set, and either pair can be fitted to the standard wings. The wing joiner system is already installed in the fuselage. The tailplane and rudder are also supplied as GRP mouldings. The clear canopy is supplied already bonded to the frame. The final work required to complete the model is essentially limited to the installation of the receiving system components.
Set contents
•GRP fuselage with white-pigmented gelcoat
•Ready-made GRP wing panels, CFRP-reinforced
•GRP rudder and tailplane
•Two pairs of GRP winglets
•Vacuum-moulded canopy bonded to frame, trimmed to fit fuselage recess
•Factory-fitted canopy latch
•Vacuum-moulded seat shell
•Pre-cut self-adhesive stickers
•Wing joiners, linkage components and various small hardware items
•Multi-lingual illustrated instructions
Länge ca.: 1270
Fluggewicht ca.: 3000



Vekt 5000 g
Dimensjoner 137 × 35 × 17 cm


Det er ingen omtaler ennå.

Bli den første til å omtale “Robbe DG 600 2.7 – 3.2m GFK”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *

+ 16 = 18